NAYCWY - Underground cable with PVC insulation and sheath, screened

NAYCWY

Underground cable with PVC insulation and sheath, screened

Power cabel with PVC Insulation and
sheath, screened

Norm: DIN VDE 0276-603 (HD 603)

Construction
1 Aluminium conductor
class 1: solid, round (SR)class 2: multi wire stranded, round (MR)or sector (SM)
2 Insulation: PVC
3 Concentric conductor: in inner layer corrugated spirally wrapped copper wires, in external layer copper tape wrapped in counter-helix
4 Filler: extruded elastomer or compound or wrapped thermoplastic tapes
5 Sheath: PVC compound, black

Application
Distribution power cable for static outdoor application, with protection against UV-irradiation, in ground, in water, within facilities, in cable canals, in concrete, in conditions where there is a danger of possible mechanical damages, but where the cable is not exposed either to systematic mechanical stress or heavier tensile strain.
Used in electric power plants, transformer stations, industrial plants, metropolitan networks and other electric plant.

Technical Data
Nominal voltage:	kV	0,6/1
Test voltage:	kV/Hz	4/50
Temperature during installation:	°C	min. -5
Temperature fixed intsalled:	°C	-50 bis +70
Conductor temperature:	°C	max. +70
At short circuit temperature	°C/s	max. +160/5
Core colour marking:		HD 308 S2 coloured (VDE 0293)
Bending radius (mind.):	mm	ca. 12 × Ø of the cable
Certification:	VDE Deutschland, GOST-R Russland

NAYCWY

Underground cable with PVC insulation and sheath, screened

	no. of corse × nom. cross. section	max. conductor resistance	current rating in the ground	current rating in the air	outer diameter	Al- number	Cu- number	total weight
	mm²	Ohm/km	A	A	ca. mm	ca. kg/km	ca. kg/km	ca. kg/km
201301	1x120 RM/35	0,253	389	302	25,0	348	240	1.070
201302	3x120 SE/120	0,253	246	220	39,5	1044	800	2.670
201303	3x120 SM/120	0,253	246	220	41,0	1044	800	2.670
201304	4x120 SE/70	0,253	246	220	42,5	1392	780	3.870
201305	4x120 SM/70	0,253	246	220	45,0	1392	780	3.870
201306	1x150 RM/35	0,206	436	345	26,5	435	240	1.230
201307	3x150 SE/150	0,206	276	249	43,0	1305	1000	3.230
201308	3x150 SM/150	0,206	276	249	45,5	1305	1000	3.230
201309	4x150 SE/70	0,206	276	249	46,5	1740	780	4.030
201310	4x150 SM/70	0,206	276	249	50,0	1740	780	4.030
201311	1x185 RM/35	0,164	496	401	29,0	537	240	1.410
201312	3x185 SE/185	0,164	313	287	47,5	1610	1230	4.020
201313	3x185 SM/185	0,164	313	287	50,5	1610	1230	4.020
201314	4x185 SE/95	0,164	313	287	55,5	2146	1055	5.050
201315	4x185 SM/95	0,164	313	287	57,0	2146	1055	5.050
201316	1x240 RM/35	0,125	576	475	32,0	696	240	1.680
201317	3x240 SE/240	0,125	362	339	52,5	2088	1585	5.350
301318	3x240 SM/240	0,125	362	339	56,0	2088	1585	5.305
201319	4x240 SE/120	0,125	362	339	60,0	2784	1330	6.200
201320	4x240 SM/120	0,125	362	339	64,0	2784	1330	6.200
201321	3x35 RE/35	0,868	123	101	28,0	305	240	1.170
201322	3x35 SM/35	0,868	123	101	26,5	305	240	1.170
201323	4x35 RE/16	0,868	123	101	27,0	406	182	1.270
201324	4x35 SM/16	0,868	123	101	30,5	406	182	1.270
201325	1x50 RM/16	0,641	230	166	19,5	145	182	620
201326	3x50 SE/50	0,641	145	121	28,5	435	340	1.170
201317	3x50 SM/25	0,641	145	121	29,0	435	340	1.285
201328	4x50 SE/25	0,641	145	121	31,0	580	283	1.700
201329	4x50 SM/25	0,641	145	121	35,0	580	283	1.700
201331	3x70 SE/70	0,443	180	155	36,0	609	475	1.670
201332	3x70 SM/70	0,443	180	155	35,0	609	475	1.670
201333	4x70 SE/35	0,443	180	155	35,0	812	394	2.170
201334	4x70 SM/35	0,443	180	155	38,5	812	394	2.170
201336	3x95 SE/95	0,320	213	189	41,0	827	640	2.230
201337	3x95 SM/50	0,320	213	189	38,1	827	560	2.136
201338	4x95 SE/50	0,320	213	189	40,0	1102	560	2.790
201339	4x95 SM/50	0,320	213	189	44,4	1102	560	2.790

→ Other cross-section on request.

1) Basic rated current acc. to DIN VDE 0276-603 (HD 603)

Technical values can change. No responsibility is therefore taken for correctness.