0331 870960
ABC tension clamps for dead ends and angular strainings
- Aerial Bundled Cables
- Accessories for ABC Cables
0210 ABC tap connectors 0211 ABC tap connectors - versions 0212 ABC tap connectors - versions with side covers 0221 ABC tension clamps for dead ends and angular strainings 0222 ABC tension clamps 0231 ABC suspension clamps 0233 ABC suspension clamps, rigid 0234 ABC suspension clamps, rigid 0241 LV-network switch for HRC fuses DIN NH-00, 4-pole 0242 ABC network switch for HRC fuses DIN NH 00, single-pole 0243 ABC network switch for HRC fuses DIN NH 00, single-pole, 2-channel output 0244 ABC switch set, single pole, tension free 0245 ABC switch NH 00 single pole, with earthing device 0246 accessory for LV-network switch NH-00 0251 ABC-network switch for HRC fuses DIN NH 1-2, single-pole 0252 accessory for LV-network switch NH 1-2 0260 ABC tap-off fuses 0261 ABC tap-off fuse holder 02711 ISO-Anschlüsse für Überspannungsableiter 02712 Anschlüsse Überspannungsableiter an blanken Freileitungen 0272 Überspannungsableiter für blanke und isolierte Freileitung 0273 mounting accessories 0274 weak link 0279 tools for ABC mounting
- Material for mounting cables on roofs
- Bare conductors for overhead lines and earthing ropes
- Acessories for bare overhead lines
- Low Voltage and medium voltage cable
- Accessories for cable mounting
- Short current and earth fault detectors
- Safety Equipment for electrical works
- Material for Solar power plants
ABC tension clamps
ABC tension clamps for dead ends and angular strainings
layout
– The four conductors are fed through
separate clamp channels.
– The wedgetype clamp is self-adjusting.
– Maximum tensile stress and breaking
strength of the clamp are in accordance
with DIN VDE 0211 (2.5 times safety).
– Pilot wire and street lighting
conductors are not gripped by the clamp, they are led alongside the clamp.
– The four conductors are fed through
separate clamp channels.
– The wedgetype clamp is self-adjusting.
– Maximum tensile stress and breaking
strength of the clamp are in accordance
with DIN VDE 0211 (2.5 times safety).
– Pilot wire and street lighting
conductors are not gripped by the clamp, they are led alongside the clamp.
material
external body: steel, hot-galvanized
insert: fibreglass-reinforced plastic
external body: steel, hot-galvanized
insert: fibreglass-reinforced plastic
1
The strain bow is flexible and made in one piece. During assembly, the clamping jaws open automatically for insertion of the ABC line.
The strain bow is flexible and made in one piece. During assembly, the clamping jaws open automatically for insertion of the ABC line.
2
The clamping body is pivoting.
The screw which is holding the clamp is secured against self opening.
The clamping body is pivoting.
The screw which is holding the clamp is secured against self opening.
Versions for different Aerial Bundled Cables
| cross section | length | bolt Ø | min. breaking strength of clamp |
maximum continous load |
conductor Ø over insulation max. mm |
packing unit | |
|---|---|---|---|---|---|---|---|
| mm² | mm | mm | N/mm | mm | |||
1 |
|||||||
| 332354002 | 4 × 25–35 | 200 | 17.000 | 40 | 11,0 | 10 | |
2 |
|||||||
| 331210210 | 4 × 25–50 | 360 | 10 | 37.000 | 40 | 12,7 | 6 |
| 331210790 | 4 × 70–95 | 400 | 12 | 43.000 | 40 | 15,2 | 6 |
©2017 witthinrich GmbH