copper under lead sheath

copper under lead sheath

Single- or multi-wire copper-conductor, soft bare
(class 2) under lead sheath (Pb)

According to DIN VDE 0295 and DIN EN 60228
Copper cables with lead sheath are indoors, outdoors and in the ground, as a lightning rod for industrial plants and buildings, especially in equipment, if similar to the action of solvents fuels, oils, gasoline must be expected. (for example in refineries and gas stations)
The lead sheath is resistant to humic acids and aggressive floor cove-constituents.
name

(Pb = thickness)
cross
section
number
of wires
min.
bending
radius
outer-
diameter ca.
copper-
no.
ca.
lead-
no.
ca.
    mm   mm mm kg/km kg/km
100601 1x16 RMv (Pb 1,20) 16 7x1,70 160 10 158 307
100602 1x25 RMv (Pb 1,20) 25 7x2,10 160 11 240 365
100603 1x35 RMv (Pb 1,20) 35 7x2,53 160 11 336 429
100604 1x50 RE (Pb 1,20) 50 1x8,00 160 11 480 436
100605 1x50 RMv (Pb 1,20) 50 7x3,00 160 11 480 436
100608 1x70 RMv (Pb 1,00) 70 19x2,24 230 12 672 442
100609 1x70 RMv (Pb 1,20) 70 12x2,73 230 13 672 539
100610 1x95 RMv (Pb 1,20) 95 19x2,60 290 14 912 622
100612 1x120 RMv (Pb 1,20) 120 19x2,95 310 16 1.152 694
100613 1x150 RMv (Pb 1,20) 150 37x2,32 350 17 1.440 758
100614 1x185 RMv (Pb 1,20) 185 37x2,60 360 19 1.776 840
100615 1x240 RMv (Pb 1,20) 240 37x2,88 380 22 2.304 961

→ Other cross-sections on request.

Technical values can change. No responsibility is therefore taken for correctness.