N2XS(F)2Y - Underground cable with XLPE insulation and HDPE sheath, longitudinally water-proof

N2XS(F)2Y

Underground cable with XLPE insulation and HDPE sheath,
longitudinally water-proof

Underground cable with XLPE insulation and HDPE sheath, longitudinally water-proof

Standard: DIN VDE 0276-620 (HD 620)

Design
1 Copper conductor, round stranded compressed (RM)
2 Inner semi-conductive layer (conductive XLPE)
3 Core insulation (XLPE)
4 Outer semi-conductive layer (conductive XLPE), taped with a conductive tape
5 Screen (bare copper wires) and counter helix (copper tape)
6 Swelling tape under and over screen
7 Sheath (HDPE black, UV-resistant)

Application
For fixed installation for high requirements in interior premises, in the ground subject to external effects of moisture, in the open air and in cable ducts for industrial and distribution mains – as permitted by the local building regulations – under severe mechanical stressing during installation and operation.

Technical Data
Rated voltage:	kV	6/10	12/20	18/30
Test voltage:	kV/Hz	18	39	48/50
Laying temperature:	°C			min. -20
Operating temperature:	°C			-50 up to +90
Conductor temperature:	°C			max. +90
Short-circuit temperature:	°C/s			max. +250 /5
Bending radius (mind.)	mm			15x Ø of cable

N2XS(F)2Y

Underground cable with XLPE insulation and HDPE sheath,
longitudinally water-proof

	no. of cores x nom. cross section	mutual capacitance	max. conductor restistant	current rating in the ground	current rating in the air 1)	outer diameter	Cu- number	total weight
	mm²	µF/km	Ohm/km	A	A	appr. mm	appr. kg/km	appr. kg/km
6/10 kV
300201	1 × 35 RM/16	0,24	0,524	187	197	26,0	518	915
300202	1 × 50 RM/16	0,26	0,387	220	236	27,0	662	1.120
300203	1 × 70 RM/16	0,30	0,268	268	294	28,0	854	1.330
300204	1 × 95 RM/16	0,31	0,193	320	358	30,0	1.094	1.620
300205	1 × 120 RM/16	0,34	0,153	363	413	32,0	1.334	1.870
300206	1 × 150 RM/25	0,39	0,124	405	468	33,0	1.723	2.260
300207	1 × 185 RM/25	0,42	0,099	456	535	35,0	2.059	2.630
300208	1 × 240 RM/25	0,47	0,075	526	631	38,0	2.587	3.220
300209	1 x 300 RM/25	0,51	0,060	591	722	40,0	3.163	3.810
300210	1 × 400 RM/35	0,57	0,047	662	827	43,0	4.234	4.850
300211	1 × 500 RM/35	0,63	0,037	744	949	46,0	5.194	5.800
12/20 kV
300320	1 × 35 RM/16	0,16	0,524	189	200	30,0	518	1.075
300313	1 × 50 RM/16	0,18	0,387	222	239	31,0	662	1.270
300327	1 × 70 RM/16	0,20	0,268	271	297	33,0	854	1.520
300312	1 × 95 RM/16	0,22	0,193	323	361	35,0	1.094	1.780
300311	1 × 120 RM/16	0,24	0,153	367	416	36,0	1.334	2.090
300307	1 × 150 RM/25	0,26	0,124	409	470	37,0	1.723	2.460
300309	1 × 185 RM/25	0,27	0,099	461	538	39,0	2.059	2.840
300310	1 × 240 RM/25	0,31	0,075	532	634	42,0	2.587	3.400
300308	1 × 300 RM/25	0,33	0,060	599	724	44,0	3.163	4.150
300328	1 × 400 RM/35	0,37	0,047	671	829	47,0	4.234	5.190
300306	1 × 500 RM/35	0,41	0,037	754	953	50,0	5.194	6.170
18/30 kV
300601	1 × 50 RM/16	0,14	0,387	225	241	36,0	662	1.520
300602	1 × 70 RM/16	0,15	0,268	274	299	38,0	854	1.790
300603	1 × 95 RM/16	0,17	0,193	327	363	40,0	1.094	2.070
300604	1 × 120 RM/16	0,18	0,153	371	418	41,0	1.334	2.360
300605	1 × 150 RM/25	0,19	0,124	414	472	42,0	1.723	2.760
300606	1 × 185 RM/25	0,21	0,099	466	539	44,0	2.059	3.170
300607	1 × 240 RM/25	0,23	0,075	539	635	47,0	2.587	3.860
300608	1 × 300 RM/25	0,25	0,060	606	725	49,0	3.163	4.490
300609	1 × 400 RM/35	0,27	0,047	680	831	52,0	4.234	5.580
300610	1 × 500 RM/35	0,30	0,037	765	953	55,0	5.194	6.600

→ Other cross-sections on request.

1) Basic rated current acc. to DIN VDE 0276-620 (HD 620). Subject to technical changes.

Technical values can change. No responsibility is therefore taken for correctness.