0331 870960
NA2XY-O+J - Underground cable with XLPE insulation and PVC sheath
- Aerial Bundled Cables
- Accessories for ABC Cables
- Material for mounting cables on roofs
- Bare conductors for overhead lines and earthing ropes
- Acessories for bare overhead lines
- Low Voltage and medium voltage cable
0610 NYY - Underground cable with PVC insulation and PVC sheath 0611 NY2Y-J - Underground cable with PVC insulation and HDPE sheath 0612 NYCY - Underground cable with PVC insulation and PVC sheath, screened 0613 NYCWY - Underground cable with PVC insulation and PVC sheath, screened 0620 NAYY-O - Underground cable with PVC insulation and PVC sheath 0621 NAYY-J - Underground cable with PVC insulation and PVC sheath 0622 NAY2Y-J - Underground cable 0623 NA2XY-O+J - Underground cable with XLPE insulation and PVC sheath 0624 NAY2Y-J - Underground cable with XLPE insulation and PVC sheath 0625 NA2X2Y - Underground cable with XLPE insulation and HDPE sheath 0626 NAYCWY - Underground cable with PVC insulation and sheath, screened 0627 (N)A2XCWY - Niederspannungskabel mit XLPE-Isolation und PVC-Mantel 0628 (N)A2XACY - Niederspannungskabel mit XLPE-Isolation und PVC-Mantel 0629 PRAFlaSafe® + AX B2ca s1d1a1 0630 N2XS(F)2Y - Underground cable with XLPE insulation and HDPE sheath, longitudinally water-proof 0636 CU/XLPE/CWS/MDPE - Medium voltage cable with XPLE insulation and MDPE sheath 0640 NA2XS2Y - Underground cable with XPLE insulation and HDPE sheath 0641 NA2XS(F)2Y - Underground cable with XPLE insulation and HDPE sheath, longitudinally water-proof 0646 AL/XLPE/CWS/MDPE - Medium voltage cable with XPLE insulation and MDPE sheath 0650 H07RN-F - rubber insulated cable 0690 Radaflex® Twin - Hochflexible Zwillingsleitung
- Accessories for cable mounting
- Short current and earth fault detectors
- Safety Equipment for electrical works
- Material for Solar power plants
NA2XY-O or -J
Underground cable with XLPE insulation and PVC sheath
Underground cable with XLPE insulation and PVC sheath
Standard: DIN VDE 0276-603 (HD 603)
Standard: DIN VDE 0276-603 (HD 603)
Design
1 Aluminium conductor, round solid (RE), sector-shaped solid (SE), round stranded (RM), resp. sector-shaped (SM)
2 Core insulation (XLPE)
3 Inner covering (EPDM)
4 Sheath (PVC black, UV-resistant)
1 Aluminium conductor, round solid (RE), sector-shaped solid (SE), round stranded (RM), resp. sector-shaped (SM)
2 Core insulation (XLPE)
3 Inner covering (EPDM)
4 Sheath (PVC black, UV-resistant)
Application
Power distribution cables in power stations, industrial installation and switchgears, as well as in local mains.
For fixed installation underground, in interior premises, cable ducts, in the open air and in water – as permitted by the local building regulations – if no risk of any mechanical damage is to be expected.
Power distribution cables in power stations, industrial installation and switchgears, as well as in local mains.
For fixed installation underground, in interior premises, cable ducts, in the open air and in water – as permitted by the local building regulations – if no risk of any mechanical damage is to be expected.
Technical Data |
||
|---|---|---|
| Rated voltage: | kV | 0,6/1 |
| Test voltage: | kVeff | 4.000 |
| Laying temperature: | °C | min. -5 |
| Operating temperature: | °C | -50 up to +90 |
| Conductor temperature: | °C | max. +90 |
| Short-circuit temperature: | °C/s | max. +250/5 |
| Core identifikation: | HD 308 S2 (VDE 0293) | |
| Bending radius (mind.) | mm | 12 × Ø of cable |
| Certificate: | VDE, EZU Tschechien | |
| Flame retardant: | acc. to EN 60332- 1-2 |
NA2XY-O or -J
Underground cable with XLPE insulation and PVC sheath
| no. of cores x nom. cross section |
max. conductor resistance |
current rating in the ground |
current rating in the air 1) |
outer diameter |
AL- number |
total weight |
||
|---|---|---|---|---|---|---|---|---|
mm² |
Ohm/km |
A |
A |
appr. mm |
appr. kg/km |
appr. kg/km |
||
| 200648 | NA2XY | 1 × 25 RE | 1.200 | 177 | 136 | 11,5 | 73 | 191 |
| 200649 | NA2XY | 1 × 35 RE | 0.868 | 212 | 166 | 12,5 | 102 | 231 |
| 200574 | NA2XY | 1 × 50 RM | 0.641 | 252 | 205 | 14,5 | 145 | 292 |
| 200650 | NA2XY | 1 × 70 RM | 0.443 | 310 | 260 | 16,3 | 203 | 390 |
| 200651 | NA2XY | 1 × 95 RM | 0.320 | 372 | 321 | 18,1 | 276 | 480 |
| 200652 | NA2XY | 1 × 120 RM | 0.253 | 425 | 376 | 19,8 | 348 | 556 |
| 200494 | NA2XY | 1 × 150 RM | 0.206 | 476 | 431 | 21,5 | 435 | 675 |
| 200495 | NA2XY | 1 × 185 RM | 0.164 | 541 | 501 | 23,8 | 537 | 830 |
| 200496 | NA2XY | 1 × 240 RM | 0.125 | 631 | 600 | 26,3 | 696 | 1.059 |
| 200481 | NA2XY | 1 × 300 RM | 0.100 | 716 | 696 | 29,0 | 870 | 1.260 |
| 200575 | NA2XY | 1 × 400 RM | 0.078 | 825 | 821 | 31,8 | 1.160 | 1.560 |
| 200653 | NA2XY | 1 × 500 RM | 0.061 | 952 | 971 | 36,5 | 1.450 | 1.949 |
| 200576 | NA2XY | 1 x 630 RM* | 0.047 | 1.102 | 1.151 | 41,9 | 1.827 | 2.386 |
* conductor is not compressed
→ Other cross-sections on request.
1) Basic rated current acc. to DIN VDE 276-603 (HD 603)
Technical values can change. No responsibility is therefore taken for correctness.
©2017 witthinrich GmbH