NA2XS2Y - Underground cable with XPLE insulation and HDPE sheath

NA2XS2Y

Underground cable with XPLE insulation and HDPE sheath

Underground cable with XPLE insulation and HDPE sheath

Standard: DIN VDE 0276-620 (HD 620)

Design
1 Aluminium conductor, round stranded compressed (RM)
2 Inner semi-conductive layer (conductive XLPE)
3 Core insulation (XLPE)
4 Outer semi-conductive layer (conductive XLPE), taped with a conductive tape
5 Screen (bare copper wires) and counter helix (copper tape)
6 Swelling tape
7 Sheath (HDPE black, UV-resistant)

Application
For fixed installation for high requirements in interior premises, in the ground subject to external effects of moisture, in the open air and in cable ducts for industrial and distribution mains – as permitted by the local building regulations – under severe mechanical stressing during installation and operation.

Technical Data
Rated voltage:	kV	6/10	12/20	18/30
Test voltage:	kV/Hz	18	39	48/50
Laying temperature:	°C			min. -20
Operating temperature:	°C			-50 up to +90
Conductor temperature:	°C			max. +90
Short-circuit temperature:	°C/s			max. +250 /5
Bending radius (mind.)	mm			15x Ø of cable

NA2XS2Y

Underground cable with XPLE insulation and HDPE sheath

	no. of cores x nom. cross section	mutual capacitance	max. conductor restistant	current rating in the ground	current rating in the air 1)	outer diam. appr.	AL- number appr.	Cu- number appr.	total weight appr.
	mm²	µF/km	Ohm/km	A	A	mm	kg/km	kg/km	kg/km
6/10kV
300335	1 x 35 RM/16	0,23	0,8680	145	153	24	102	182	580
300336	1 x 50 RM/16	0,24	0,6410	171	183	25	145	182	620
300337	1 x 70 RM/16	0,28	0,4430	208	228	26	203	182	720
300338	1 x 95 RM/16	0,31	0,3200	248	278	28	276	182	800
300339	1 x 120 RM/16	0,34	0,2530	283	321	29	348	182	900
300350	1 x 150 RM/25	0,37	0,2060	315	364	30	435	283	1.100
300354	1 x 185 RM/25	0,40	0,1640	357	418	32	537	283	1.250
300353	1 x 240 RM/25	0,45	0,1250	413	494	34	696	283	1.450
300352	1 x 300 RM/25	0,49	0,1000	466	568	37	870	283	1.650
300340	1 x 400 RM/35	0,54	0,0778	529	660	40	1.160	394	2.050
300341	1 x 500 RM/35	0,60	0,0605	602	767	43	1.450	394	2.400
300342	1 x 630 RM/35	0,67	0,0469	683	889	46	1.827	394	2.850
300517	1 x 800 RM/35	0,75	0,0367	766	1.015	51	2.320	394	3.450
12/20kV
300513	1 x 35 RM/16	0,16	0,8680	146	155	28	102	182	725
300514	1 x 50 RM/16	0,17	0,6410	172	185	29	145	182	900
300515	1 x 70 RM/16	0,19	0,4430	210	231	30	203	182	1.000
300501	1 x 95 RM/16	0,21	0,3200	251	280	32	276	182	1.100
300504	1 x 120 RM/16	0,23	0,2530	285	323	33	348	182	1.250
300503	1 x 150 RM/25	0,25	0,2060	319	366	34	435	283	1.450
300502	1 x 185 RM/25	0,27	0,1640	361	420	36	537	283	1.650
300505	1 x 240 RM/25	0,30	0,1250	417	496	38	696	283	1.850
300507	1 x 300 RM/25	0,33	0,1000	471	569	41	870	283	2.050
300509	1 x 400 RM/35	0,36	0,0778	535	660	44	1.160	394	2.450
300508	1 x 500 RM/35	0,40	0,0605	609	766	47	1.450	394	2.850
300510	1 x 630 RM/35	0,44	0,0469	691	889	50	1.827	394	3.250
300516	1 x 800 RM/35	0,49	0,0367	777	1.014	55	2.320	394	3.900
18/30kV
300701	1 x 50 RM/16	0,13	0,6410	174	187	36	145	182	990
300702	1 x 70 RM/16	0,15	0,4430	213	232	38	203	182	1.100
300703	1 x 95 RM/16	0,16	0,3200	254	282	40	276	182	1.250
300704	1 x 120 RM/16	0,18	0,2530	289	325	41	348	182	1.350
300705	1 x 150 RM/25	0,19	0,2060	322	367	42	435	283	1.550
300706	1 x 185 RM/25	0,20	0,1640	364	421	44	537	283	1.700
300707	1 x 240 RM/25	0,22	0,1250	422	496	47	696	283	1.950
300708	1 x 300 RM/25	0,24	0,1000	476	568	49	870	283	2.200
300709	1 x 400 RM/35	0,26	0,0778	541	659	52	1.160	394	2.600
300710	1 x 500 RM/35	0,29	0,0605	616	764	56	1.450	394	3.000
300711	1 x 630 RM/35	0,32	0,0469	701	886	61	1.827	394	3.500
300518	1 x 800 RM/35	0,36	0,0367	789	1.011	66	2.320	394	4.300

→ Other cross-sections on request.

1) Basic rated current acc. to DIN VDE 0276-620 (HD 620). Subject to technical changes.

Technical values can change. No responsibility is therefore taken for correctness.