0331 870960
Cable clamp
- Aerial Bundled Cables
- Accessories for ABC Cables
- Material for mounting cables on roofs
- Bare conductors for overhead lines and earthing ropes
- Acessories for bare overhead lines
- Low Voltage and medium voltage cable
- Accessories for cable mounting
0710 Cable clamp 0711 Cable clamp, type ST + STC 0712 Cable clamp, type TRI + TRI eco 0713 Cable clamp, type UNI 0714 B-tool 0715 Cable clamp, type ST eco 0716 Cable clamp, type SQ 0721 Schrumpfschlauch 0722 1 kV-Schrumpfverbindungsmuffen – dickwandig mit Verbinder 0723 Aufteilkappen 0724 Endkappen, dickwandig 0725 Endmuffen – spannungsfest, dickwandig 0726 1 kV-Reparaturmanschetten, reißfest 0727 Mauerdurchführungen, wärmeschrumpfend 07343 Al - Pressverbinder, zugfest 0760 Cable cover plates 0761 Cable cover rolls 0762 Cable cover, type RH and HA
- Short current and earth fault detectors
- Safety Equipment for electrical works
- Material for Solar power plants
Cable clamp
Application
Cable clamps are suitable for fitting single- and multiple-conductor low- medium and high voltage cables with a nominal outer diameters from 18 up to 130 mm-
Cable clamps are suitable for fitting single- and multiple-conductor low- medium and high voltage cables with a nominal outer diameters from 18 up to 130 mm-
Certification
tested by KEMA Netherland, SGS Belgium, Underwriters Laboratories Inc. (UL) and Schneider France
according to International Standard NEN-EN-IEC 61914:2009
– flame resitant acc. to VDE 0304, part 3, class II A
– glowing wire test acc. to IEC 695-2-1
tested by KEMA Netherland, SGS Belgium, Underwriters Laboratories Inc. (UL) and Schneider France
according to International Standard NEN-EN-IEC 61914:2009
– flame resitant acc. to VDE 0304, part 3, class II A
– glowing wire test acc. to IEC 695-2-1
Technial data
Flexure strength: 210 N/mm²
Tensile strength: 120 N/mm²
Temperature limits: permanent application from-50°C to +120°C; brief heating up to 220°C
Mechanical strength: from 20.000 N up to 84.000 N.
Initial torque for fastening bolts, nuts, screws: 5-8 Nm (depends on cable manufacturer´s prescription).
Flexure strength: 210 N/mm²
Tensile strength: 120 N/mm²
Temperature limits: permanent application from-50°C to +120°C; brief heating up to 220°C
Mechanical strength: from 20.000 N up to 84.000 N.
Initial torque for fastening bolts, nuts, screws: 5-8 Nm (depends on cable manufacturer´s prescription).
©2017 witthinrich GmbH